725 Articulated Truck
The Cat® 725 features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, automatic retarder control, stability-assist machine rollover warning system, and a fuel saving ECO mode.
| Engine Model | Cat C9.3 |
|---|---|
| Net Power - ISO 14396 | 252 kW |
| Bore | 115 mm |
| Stroke | 1149 mm |
| Displacement | 9.3 l |
| Emissions | The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | Cat® C9.3 |
| Gross Power - SAE J1995 | 255 kW |
| Net Power - SAE J1349 | 249 kW |
| No Engine De-rating Below | 914 m |
| Note (1) | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (4) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| Peak Engine Torque Gross (SAE J1995) | 1729 N·m |
| Peak Engine Torque Net (SAE J1349) | 1712 N·m |
| Peak Engine Torque Speed | 1200 r/min |
| Note (3) | Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. |
| Rated Payload | 24 t |
|---|
| Heaped (SAE 2:1) | 15 m³ |
|---|---|
| Struck | 11 m³ |
| Tailgate Heaped SAE 2:1 | 15.6 m³ |
| Tailgate Struck | 11.1 m³ |
| Final Drive - Each | 7.5 l |
|---|---|
| Final Drives/Differential | 125 l |
| Output Transfer Gear Box | 24 l |
| DEF Tank | 20 l |
| Fuel Tank | 412 l |
| Cooling System | 83 l |
| Transmission | 47 l |
| Engine Crankcase | 38 l |
| Hydraulic System | 110 l |
| Steering/Hoist Hydraulic System | 110 l |
| Forward - 1 | 8.1 km/h |
|---|---|
| Forward - 2 | 15.2 km/h |
| Forward - 3 | 23.2 km/h |
| Forward - 4 | 35.5 km/h |
| Reverse - 1 | 8.9 km/h |
| Forward - 6 | 58.4 km/h |
| Forward - 5 | 49.4 km/h |
| Interior Cab | 69 dB(A) |
|---|---|
| Note (1) | The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Raise Time | 10 s |
|---|---|
| Lower Time | 8 s |
| Type | High strength Brinell HB450 wear resistant steel |
|---|
| Base Plate | 13 mm |
|---|---|
| Front Plate | 7 mm |
| Side Plates | 11 mm |
| Center Axle - Empty | 4646 kg |
|---|---|
| Center Axle - Loaded | 15397 kg |
| Center Axle - Rated Load | 10750 kg |
| Front Axle - Empty | 14050 kg |
| Front Axle - Loaded | 16549 kg |
| Front Axle - Rated Load | 2500 kg |
| Rear Axle - Empty | 4426 kg |
| Rear Axle - Loaded | 15176 kg |
| Rear Axle - Rated Load | 10750 kg |
| Total - Empty | 23122 kg |
| Total - Loaded | 47122 kg |
| Total - Rated Load | 24000 kg |
| Hydraulic Excavators: 336F/336F XE - Passes | 5-6 |
|---|---|
| Hydraulic Excavators: 349F/349F XE - Passes | 4-5 |
| Wheel Loader: 950M - Passes | 5 |
| Wheel Loader: 962M - Passes | 4-5 |
| Wheel Loaders: 966M/966M XE - Passes | 4 |
| Wheel Loaders: 972M/972M XE - Passes | 3-4 |
| Steering | ISO 5010 – 2007 |
|---|---|
| Brakes | ISO 3450 – 2011 |
| Cab - FOPS | ISO 3449 Level II – 2008 |
| Cab - ROPS | ISO 3471 – 2008 |
| Lock to Lock | 4.75 seconds @ 60 rpm |
|---|
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
|---|---|
| Turning Dimensions - Aisle Width | 5332 mm |
| Turning Dimensions - Clearance Radius | 8075 mm |
| Turning Dimensions - Inside Radius | 3879 mm |
| Turning Dimensions - SAE Turning Radius | 7470 mm |
| Turning Dimensions - Steer Angle - Left/Right | 45° |
Ask Quotation
Usados
