950M Wheel Loader | Front Loader | Tier 4
The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.
| Net Power - ISO 9249 | 187 kW |
|---|---|
| Engine Model | Cat C7.1 |
| Displacement | 7.01 l |
| Emissions | Tier 4/Stage V |
| Maximum Net Power - 2,100 rpm - ISO 9249 | 171 kW |
| Maximum Net Power - 2,100 rpm - ISO 9249 - Metric | 171 kW |
| Maximum Net Power - 2,100 rpm - SAE J1349 | 171 kW |
| Maximum Net Torque - 1,300 rpm | 1163 N·m |
| Maximum Power - 2,100 rpm - ISO 14396 | 186 kW |
| Maximum Power - 2,100 rpm - ISO 14396 - Metric | 186 kW |
| Maximum Power - 2,100 rpm - SAE J1995 | 187 kW |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes. |
| Peak Gross Torque - 1,300 rpm - ISO 14396 | 1231 N·m |
| Peak Gross Torque - 1,300 rpm - SAE J1995 | 1235 N·m |
| Operating Weight | 19213 kg |
|---|---|
| Note | Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m³ (4.1 yd³) general purpose bucket with BOCE. |
| Bucket Range | 2.5-9.2 m³ (3.3-12.0 yd³) |
|---|
| Bucket Capacities | 2.5-9.2 m³ (3.3-12.0 yd³) |
|---|
| Forward - 1 | 6.9 km/h |
|---|---|
| Forward - 2 | 12 km/h |
| Forward - 3 | 19.3 km/h |
| Forward - 4 | 25.7 km/h |
| Reverse - 1 | 6.9 km/h |
| Reverse - 2 | 12 km/h |
| Reverse - 3 | 25.7 km/h |
| Forward - 5 | 39.5 km/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius. |
| Breakout Force | 181 kN |
|---|---|
| Note (1) | For a machine configuration as defined under "Weight." |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 11760 kg |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 11005 kg |
| Note (2) | Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| DEF Tank | 16 l |
|---|---|
| Fuel Tank | 275 l |
| Cooling System | 59 l |
| Transmission | 43 l |
| Differential - Final Drives - Front | 43 l |
| Differential - Final Drives - Rear | 43 l |
| Crankcase | 22 l |
| Hydraulic Tank | 125 l |
| Wheel Base | 3350 mm |
|---|---|
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Centerline of Rear Axle to Edge of Counterweight | 1942 mm |
| Centerline of Rear Axle to Hitch | 1675 mm |
| Ground Clearance | 367 mm |
| Height - Top of Exhaust Pipe | 3413 mm |
| Height - Top of Hood | 2697 mm |
| Height - Top of ROPS | 3451 mm |
| Hinge Pin Height at Carry Height | 647 mm |
| Hinge Pin Height at Maximum Lift | 4027 mm |
| Maximum Width over Tires (loaded) | 2822 mm |
| Overall Length (without bucket) | 6906 mm |
| Tread Width | 2140 mm |
| Implement System - Maximum Operating Pressure | 29300 kPa |
|---|---|
| Hydraulic Cycle Time - Total | 8.9 s |
| Implement Pump Type | Variable Axial Piston |
| Implement System - Maximum Pump Output at 2,150 rpm | 286 l/min |
| Centerline of Rear Axle to Edge of Counterweight | 1942 mm |
|---|---|
| Centerline of Rear Axle to Hitch | 1675 mm |
| Ground Clearance | 367 mm |
| Height - Top of Exhaust Pipe | 3413 mm |
| Height - Top of Hood | 2697 mm |
| Height - Top of ROPS | 3451 mm |
| Hinge Pin Height at Maximum Lift | 4527 mm |
| Lift Arm Clearance at Maximum Lift | 3634 mm |
| Overall Length - Without Bucket | 7488 mm |
| Tread Width | 2140 mm |
| Wheel Base | 3350 mm |
| Hinge Pin Height at Carry Height | 782 mm |
| Maximum Width - Over Tires - Loaded | 2822 mm |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back at Ground | 40 degrees |
| Centerline of Rear Axle to Edge of Counterweight | 1942 mm |
|---|---|
| Centerline of Rear Axle to Hitch | 1675 mm |
| Ground Clearance | 367 mm |
| Height - Top of Exhaust Pipe | 3413 mm |
| Height - Top of Hood | 2697 mm |
| Hinge Pin Height at Carry Height | 647 mm |
| Maximum Width - Over Tires - Loaded | 2822 mm |
| Note | All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires. |
| Height - Top of ROPS | 3451 mm |
| Hinge Pin Height at Maximum Lift | 4027 mm |
| Lift Arm Clearance at Maximum Lift | 3280 mm |
| Overall Length - Without Bucket | 6906 mm |
| Tread Width | 2140 mm |
| Wheel Base | 3350 mm |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 59 degrees |
| Rack Back at Ground | 36 degrees |
| Note (1) | *Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
|---|---|
| Note (2) | **For machines in European Union countries and in countries that adopt the EU Directives. |
| Note (3) | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** | 104 LWA*** |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** | 69 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) | 107 dB(A) |
| With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) | 75 dB(A)* |
| With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A) |
| Emissions | Tier 4/Stage IV |
|---|
Ask Quotation
Usados
