982 XE
The Cat® 982 XE Wheel Loader delivers increased fuel efficiency, premium performance with simple-to-use standard technologies to boost operator efficiencies, and lower maintenance costs. This machine is designed to meet emission standards without interrupting operation. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 | 301 kW |
---|---|
Engine Model | Cat C13 |
Note (1) | Cat engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Displacement | 12.5L |
Engine Power @ 1,700 rpm – ISO 14396:2002 | 322 kW |
Engine Torque @ 1,200 rpm – ISO 14396:2002 | 2197 N·m |
Gross Power @ 1,700 rpm – SAE J1995:2014 | 325 kW |
Gross Torque @ 1,200 rpm – SAE J1995:2014 | 2218 N·m |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 | 2054 N·m |
Operating Weight | 35510 kg |
---|---|
Note | Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m³ (8.0 yd³) general purpose bucket with BOCE. |
Bucket Range | 4.8-17.2 m³ 6.25-22.5 yd³ |
---|
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | 107 |
---|---|
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | 110 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | 75 |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A) |
Note (1) | * For machines in European Union countries and in countries that adopt the “EU Directives.” |
Note (2) | European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
Forward - 1 | 6.2 km/h |
---|---|
Forward - 2 | 11.8 km/h |
Forward - 3 | 20.9 km/h |
Forward - 4 | 39.5 km/h |
Reverse - 1 | 7.1 km/h |
Reverse - 2 | 13.5 km/h |
Reverse - 3 | 28 km/h |
Note | Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
Breakout Force | 262 kN |
---|---|
Note (1) | For a machine configuration as defined under Weight. |
Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Static Tipping Load - Full 40° Turn - No Tire Deflection | 49410 lb |
Static Tipping Load - Full 40° Turn - With Tire Deflection | 21110 kg |
DEF Tank | 21 l |
---|---|
Fuel Tank | 426 l |
Cooling System | 52 l |
Transmission | 77 l |
Differential - Final Drives - Front | 92 l |
Differential - Final Drives - Rear | 92 l |
Crankcase | 37 l |
Hydraulic Tank | 153 l |
Implement System - Maximum Operating Pressure | 34300 kPa |
---|---|
Implement System - Maximum Pump Output at 2,250 rpm | 449 l/min |
Hydraulic Cycle Time - Total | 10.1 seconds |
Note | All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
---|
Centerline of Rear Axle to Edge of Counterweight | 2843 mm |
---|---|
Centerline of Rear Axle to Hitch | 1900 mm |
Ground Clearance | 428 mm |
Height - Top of Exhaust Pipe | 3736 mm |
Height - Top of Hood | 3036 mm |
Height - Top of ROPS | 3801 mm |
Hinge Pin Height at Carry | 896 mm |
Hinge Pin Height at Maximum Lift | 5150 mm |
Lift Arm Clearance at Maximum Lift | 4069 mm |
Overall Length - Without Bucket | 9104 mm |
Tread Width | 2540 mm |
Wheel Base | 3800 mm |
Width over Tires (Loaded) | 3471 mm |
Centerline of Rear Axle to Edge of Counterweight | 2729 mm |
---|---|
Centerline of Rear Axle to Hitch | 1900 mm |
Ground Clearance | 1.4 ft |
Height - Top of Exhaust Pipe | 12.4 ft |
Height - Top of Hood | 10 ft |
Height - Top of ROPS | 12.6 ft |
Hinge Pin Height at Carry | 791 mm |
Hinge Pin Height at Maximum Lift | 15.6 ft |
Lift Arm Clearance at Maximum Lift | 12.9 ft |
Overall Length - Without Bucket | 28.3 ft |
Tread Width | 2540 mm |
Wheel Base | 12.6 ft |
Width over Tires (Loaded) | 3471 mm |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
---|