R2900 Underground LHD Loader
Our most popular LHD model is available with the latest emission control solutions. With its advanced, EU Stage V compliant engine and aftertreatment, the new R2900 helps improve the underground air quality, is quiet, and stays true to its heritage of long-term durability and performance.<br>The R2900 is a powerful new tool for underground mining.
| Engine Power - Stage V Engine - ISO 14396:2002 | 293 kW |
|---|---|
| Engine Power - VR Engine - ISO 14396:2002 | 299 kW |
| Engine Model | Cat® C15 |
| Bore | 137.2 mm |
| Stroke | 171.5 mm |
| Displacement | 15.2 l |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 299 kW |
| Gross Power - EU Stage V Engine - ISO 14396 | 293 kW |
| Gross Power - ISO 14396 | 305 kW |
| Gross Power - Tier 3/Stage IIIA Equivalent Engine - ISO 14396 | 305 kW |
| Gross Power - VR Engine - ISO 14396 | 305 kW |
| Net Power - EU Stage V Engine - SAE J1349 | 281 kW |
| Net Power - Tier 3/Stage IIIA Equivalent Engine - SAE J1349 | 286 kW |
| Net Power - VR Engine - SAE J1349 | 286 kW |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm for VR and Tier 3 equivalent model when tested under the reference conditions for the specified standard. |
| Note (2) | Power ratings apply at a rated speed of 2,000 rpm for Stage V model engine when tested under the reference conditions for the specified standard. |
| Note (4) | Minimal engine derating* required up to 2926 m (9600 ft) at rated speed for Stage V engines, 3048 m (10,000 ft) altitude for Tier 3/Stage IIIA equivalent engines, and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines. (*<5%) |
| Note (5) | Optional Ventilation Reduction Package available. |
| Note (6) | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. |
| Note (7) | Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Note (3) | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (59° F) and fuel inlet temperature 40° C (104° F). |
| Nominal Payload Capacity | 17200 kg |
|---|---|
| Gross Machine Mass | 73816 kg |
| Rated Payload | 17200 kg |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 42686 kg |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | 36599 kg |
| Breakout Force - Lift (ISO) | 22704 kg |
| Breakout Force - Tilt (ISO) | 27346 kg |
| Shipping Mass | 56791 kg |
| Note | *Calculated Weight. |
|---|---|
| Operating Mass + Rated Payload* | 69289 kg |
| Operating Mass + Rated Payload* - Front Axle | 49872 kg |
| Operating Mass + Rated Payload* - Rear Axle | 19417 kg |
| Operating Mass* | 52089 kg |
| Operating Mass* - Front Axle | 22962 kg |
| Operating Mass* - Rear Axle | 29127 kg |
| Reverse - 4 | 32.8 km/h |
|---|---|
| Forward - 1 | 5.1 km/h |
| Forward - 2 | 9.7 km/h |
| Forward - 3 | 17.3 km/h |
| Forward - 4 | 30.4 km/h |
| Reverse - 1 | 6.6 km/h |
| Reverse - 2 | 12 km/h |
| Reverse - 3 | 21.5 km/h |
| Lower, Empty, Float Down | 3.1 s |
|---|---|
| Total Cycle Time | 15.7 s |
| Dump | 3.4 s |
| Raise | 9.2 s |
| Axle Oscillation | 8° |
|---|---|
| Articulation Angle | 42.5° |
| Inner Clearance Radius** | 3401 mm |
| Note | **Clearance dimensions are for reference only. |
| Outside Clearance Radius** | 7323 mm |
| Lift/Tilt System - Circuit | Open Centre, Pilot Control |
|---|---|
| Lift Cylinder - Bore | 230 mm |
| Lift Cylinder - Stroke | 747 mm |
| Lift/Tilt System - Pump | Fixed Displacement Gear Pump |
| Maximum Flow at 2,120 rpm | 440 l/min |
| Relief Valve Setting - Main | 23500 kPa |
| Tilt Cylinder - Bore | 267 mm |
| Tilt Cylinder - Stroke | 546 mm |
| DEF Tank | 32 l |
|---|---|
| Fuel Tank | 630 l |
| Cooling System | 75 l |
| Transmission | 62 l |
| Front Differential and Final Drives | 119 l |
| Rear Differential and Final Drives | 127 l |
| Engine Crankcase | 34 l |
| Front Differential and Final Drives - With Axle Oil Cooling System | 159 l |
| Hydraulic Tank | 140 l |
| Rear Differential and Final Drives - With Axle Oil Cooling System | 167 l |
| Tire Size | 29.5 R29 |
|---|
| Standards | ROPS/FOPS Certified Cab |
|---|
| Dump Bucket - 1 | 6.3 m³ |
|---|---|
| Dump Bucket - 2 - Standard Bucket | 7.2 m³ |
| Dump Bucket - 3 | 8.3 m³ |
| Dump Bucket - 4 | 8.9 m³ |
| Bucket Capacities | 6.3-8.9 m³ (8.2-11.6 yd³) |
| Cab Sound Pressure Level | 80.9 +/- 2.5 dB(A) |
|---|---|
| Machine Sound Power Level | 116.8 +/- 2.5 dB(A) |
| Note | The declared sound levels listed are for standard machine configurations, measured according to ISO6395:2008 and ISO6396:2008 and include measurement uncertainty due to the production variation. |
Ask Quotation
Usados
