Pá de Rodas 966 XE
The Cat® 966 XE Wheel Loader delivers increased fuel efficiency, premium performance with simple-to-use standard technologies to boost operator efficiencies, and lower maintenance costs. This machine is designed to meet emission standards without interrupting operation. Improved performance, reliability, durability, and versatility result in a machine that is better built to meet your needs.
| Engine Power @ 1,600 rpm - ISO 14396:2002 | 239 kW |
|---|---|
| Engine Model | Cat C9.3B |
| Gross Power @ 1,600 rpm - SAE J1995:2014 | 242 kW |
| Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 | 222 kW |
| Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 | 1662 N·m |
| Note (1) | Cat engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Displacement | 9.3 L |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | 1781 N·m |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | 1799 N·m |
| Note (3) | Cat engines are compatible with the following renewable, alternative, andbio-fuels* with lower greenhouse gas emission impact: Up to B20 biodiesel (FAME) ** Up to 100% HVO and GTL renewable fuels* Refer to guidelines for successful application. Please consult your Catdealer or Caterpillar Machine Fluids Recommendations (SEBU6250) fordetails.** For use of higher blends, consult your Cat dealer. |
| Operating Weight | 23196 kg |
|---|---|
| Note | Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, secondary steering, sound suppression, and a 4.2 m³ (5.5 yd³) general purpose bucket with BOCE. |
| Bucket Range | 2.8-11.9 m³ 3.75-15.5 yd³ |
|---|
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | 105 |
|---|---|
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | 67 dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | 107 dB(A) |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | 74 |
| With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | 67 dB(A) |
| Note (1) | ** For machines in European Union countries and in countries that adopt the EU Directives. |
| Note (2) | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
| With Cooling Fan Speed at Maximum Value - Note | Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Forward - 1 | 6.9 km/h |
|---|---|
| Forward - 2 | 13 km/h |
| Forward - 3 | 22.7 km/h |
| Forward - 4 | 39.5 km/h |
| Reverse - 1 | 6.9 km/h |
| Reverse - 2 | 13 km/h |
| Reverse - 3 | 28.8 km/h |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. |
| Breakout Force | 174 kN |
|---|---|
| Note (1) | For a machine configuration as defined under �Weight.� |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | 35224 lb |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | 14849 kg |
| DEF Tank | 26 l |
|---|---|
| Fuel Tank | 303 l |
| Cooling System | 66 l |
| Transmission | 63 l |
| Differential - Final Drives - Front | 57 l |
| Differential - Final Drives - Rear | 57 l |
| Crankcase | 23 l |
| Hydraulic Tank | 114 l |
| Implement System - Maximum Operating Pressure | 31000 kPa |
|---|---|
| Implement System - Maximum Pump Output at 2,250 rpm | 348 l/min |
| Hydraulic Cycle Time - Total | 10.1 seconds |
| Note | All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. |
|---|
| Centerline of Rear Axle to Edge of Counterweight | 2458 mm |
|---|---|
| Centerline of Rear Axle to Hitch | 1775 mm |
| Ground Clearance | 424 mm |
| Height - Top of Exhaust Pipe | 3531 mm |
| Height - Top of Hood | 2580 mm |
| Height - Top of ROPS | 3593 mm |
| Hinge Pin Height at Carry | 782 mm |
| Hinge Pin Height at Maximum Lift | 4804 mm |
| Lift Arm Clearance at Maximum Lift | 4183 mm |
| Overall Length - Without Bucket | 8069 mm |
| Tread Width | 2230 mm |
| Wheel Base | 3550 mm |
| Rack Back - Carry Height | 49 degrees |
| Rack Back - Maximum Lift | 71 degrees |
| Rack Back at Ground | 37 degrees |
| Width over Tires (Loaded) | 3012 mm |
| Centerline of Rear Axle to Edge of Counterweight | 2290 mm |
|---|---|
| Centerline of Rear Axle to Hitch | 1775 mm |
| Ground Clearance | 1.4 ft |
| Height - Top of Exhaust Pipe | 11.8 ft |
| Height - Top of Hood | 9.5 ft |
| Height - Top of ROPS | 11.1 ft |
| Hinge Pin Height at Carry | 635 mm |
| Hinge Pin Height at Maximum Lift | 13.11 ft |
| Lift Arm Clearance at Maximum Lift | 12.1 ft |
| Overall Length - Without Bucket | 24.4 ft |
| Tread Width | 2230 mm |
| Wheel Base | 11.8 ft |
| Rack Back - Carry Height | 50 degrees |
| Rack Back - Maximum Lift | 62 degrees |
| Rack Back at Ground | 40 degrees |
| Width over Tires (Loaded) | 3012 mm |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
|---|
Pedir cotação
Usados
